Don't see your question? Call or text (505) 369-5747.
Frequently asked questions
How much does a new asphalt driveway cost?
In the East Mountains, typically about $5 to $9 per square foot including excavation, base and hot-mix asphalt. Conversions from gravel, overlays, chip seal and millings cost less. See our cost guide.
Do you offer free estimates?
Yes. We visit, measure, check your base and drainage, and give you a written estimate at no cost.
What areas do you serve?
Edgewood, Moriarty, Tijeras, Cedar Crest, Sandia Park, Stanley, Estancia, McIntosh, Chilili, Tajique and Albuquerque's Four Hills area, plus nearby countryside.
How thick should my driveway be?
Most residential driveways get 2 to 3 inches of compacted hot-mix over 4 to 6 inches of compacted aggregate base. Heavier vehicles and soft soils call for more.
Can you pave over my existing gravel?
Usually, once the gravel is regraded, supplemented where thin, and compacted into a solid base. Asphalt placed on loose gravel cracks early.
Should I resurface or replace my driveway?
If the base is sound and the damage is mostly on the surface, an overlay is a good value. Widespread alligator cracking, sinking or pumping water means the base has failed and replacement is needed.
When is the best time to pave?
Late spring through fall, when ground and air temperatures allow hot mix to compact properly. Book early — the season fills up.
How long before I can drive on new asphalt?
Typically 2 to 3 days for cars, longer in very hot weather. Avoid heavy trucks, trailer jacks and turning tires in place for the first few weeks.
When should I sealcoat a new driveway?
Wait 6 to 12 months for new asphalt to cure, then sealcoat every 2 to 3 years.
Do you seal cracks?
Yes, with hot-pour rubberized crack sealant that stays flexible through freezing nights and hot days.
Is chip seal a good option for my long driveway?
Often. Chip seal gives a firm, dust-free, plowable surface for considerably less than hot-mix asphalt, which makes it popular for long rural driveways and private roads.
Can neighbors share the cost of paving a private road?
Yes. We can price the whole road and break it out by section or property so the cost can be split.
Do you work on commercial properties?
Yes — parking lots, churches, storage and RV yards, ranch properties and HOAs, scheduled around your operations.
Do I need a permit?
Repaving an existing driveway usually doesn't require one. New connections to county roads or state highways may need an access permit. We'll let you know during the estimate.
How do I get a quote?
Call or text (505) 369-5747, or use our estimate form. Photos and rough dimensions help us give a quicker ballpark.