Paving built for Edgewood's ground and weather
Edgewood sits at roughly 6,600 feet on the northern edge of the Estancia Valley, where the plains meet the eastern slope of the Sandias. That location gives us cold, clear winter nights, strong spring winds, and summer monsoons that can drop an inch of rain in an hour. Pavement here has to survive all three, and most of the failures we're called to fix trace back to one thing: water getting under the asphalt and freezing.
Soils around town range from sandy loam to pockets of clay that swell when wet and shrink when dry. A driveway laid on unprepared clay will heave and crack no matter how good the asphalt is. That's why every Edgewood driveway we build starts with digging out soft areas, shaping the grade to drain, and compacting a real aggregate base.
Common projects around Edgewood
Gravel to asphalt
Many Edgewood homes were built with gravel drives that have since rutted, washboarded and spread into the yard. Converting to asphalt — often reusing the old gravel as part of the base — is the most common job we do in town. See how conversions work.
Long acreage driveways
On larger lots, paving several hundred feet isn't always necessary. We often pave the parking area and the stretch near the house, then finish the run to the road with chip seal or compacted millings.
Road aprons
Where a driveway meets a paved county road, a short asphalt apron keeps gravel off the road, stops edge breakup and gives a clean entrance. If the driveway crosses a roadside ditch, we install or replace the culvert at the same time.
Businesses along the I-40 corridor
Shops, offices, churches and storage yards along Route 66 and the frontage roads need lots that handle trucks and plows. We handle parking lot paving, resurfacing, sealcoating and striping.
Timing your project
Hot-mix asphalt needs warm ground and air to compact properly, so the main paving season in Edgewood runs from about late spring into fall. Sealcoating needs even warmer, dry days. If you're planning a spring project, getting an estimate in the off-season puts you near the front of the schedule.
Want a ballpark before we visit? Text a few photos and the rough length and width of your driveway to (505) 369-5747. Our Edgewood cost guide also lists typical price ranges.
Paving services in Edgewood
- New asphalt driveways and gravel-to-asphalt conversions
- Resurfacing and overlays for worn driveways with a solid base
- Sealcoating and crack sealing
- Pothole and asphalt repair
- Private road paving, chip seal and recycled millings
- Parking lots and commercial paving
- Grading, drainage and base prep
Frequently asked questions
Do you only work in Edgewood?
Edgewood is our home base, and we also serve Moriarty, Tijeras, Cedar Crest, Sandia Park, Stanley, Estancia, McIntosh, Chilili, Tajique and Albuquerque's Four Hills area.
Do I need a permit to pave my driveway in Edgewood?
Repaving an existing driveway on your property typically doesn't require one. A new driveway connection to a public road may need an access permit from the Town, Santa Fe County or NMDOT depending on the road. We'll let you know during the estimate.
How soon can you start?
It depends on the season and weather. Call or text for current availability — small repairs can often be scheduled quickly during paving season.
Do you give free estimates in Edgewood?
Yes. We'll come out, measure, check your base and drainage, and give you a written price at no cost.
Keep reading
Driveway Sealcoating in Edgewood, NM
Sealcoating plus hot-pour crack sealing for Edgewood driveways and lots.
Learn more →Parking Lot Paving in Edgewood, NM
Commercial lot paving, repair, sealcoating and striping for Edgewood properties.
Learn more →Asphalt Driveway Cost Guide
Typical 2026 price ranges for driveways, overlays, sealcoating, chip seal and more.
Learn more →